| Name |
Comments |
|
|
|
|
|
16 Stian Abrahamsen
suzuki_sj413@hotmail.com
Location: Norway
IP: 84.49.212.209
|
 Thursday 22-Jul-10 19:04:31 GMT   |
|
|
|
 |
Way to go!!! Keep it up!!  |
 |
|
|
15 mosss oliveira
mossoliveira@yahoo.com.au
Location: Brazil
IP: 200.228.254.170
|
| Monday 01-Mar-10 20:01:19 GMT |
|
|
|
|
| Interesting site...I think there are some people aware that a lot of things are wrong in this world and it need to be changed. The new era is comming, good and openminded people need to get together! |
|
|
|
14 DejaVu
eanner@sbcglobal.net
Location: Illinois
IP: 76.227.78.215
|
| Saturday 26-Dec-09 17:12:13 GMT |
|
|
|
|
Wonderful site and your parents must be incredibly proud of you! You are a fine young man and you are about to become a Jedi.
May the force be with you.  |
|
|
|
13 Hulusi
IP: 203.219.89.50
|
| Monday 01-Jun-09 17:28:50 GMT |
|
|
|
|
Great site keep it up champ!
Bring on the revolution..
 |
|
|
|
12 Robert
g.robert9@gmail.com
IP: 192.168.16.102<br> [87.79.237.145]
|
| Tuesday 26-May-09 18:38:05 GMT |
|
|
|
|
| Great thing that you took the time and do research and share with us. If you haven't already you really should visit www.thezeitgeistmovement.com and/or www.thevenusproject.com . You won't regret it. |
|
|
|
11 Aaron
vannattaaaron@comcast.net
http://vpchambersburg.blogspot.com
Location: Chambersburg, pa
IP: 69.244.105.235
|
| Saturday 23-May-09 22:42:05 GMT |
|
|
|
|
This is so Wonderful what you are doing here with this site. I feel that you might want to contact Jacque Fresco one intelligent incredible engineer and an expert in society, culture, and civilization. You and him would get along very well. As well as Peter Joseph.
Thankyou so much for your time and effort on this. I've already helping you promote this site the best i can on both of my Blogs and many other places. |
|
|
|
10 Stuart Barham
sbarham103@yahoo.com
http://www.stuartsvista.co.uk
Location: MK - UK
IP: 217.154.182.162
|
| Tuesday 13-Jan-09 15:14:43 GMT |
|
|
|
|
OK - I think I know what your on about with that comment...
(GP.com – Green Power Communities
Hungarian / Austrian EU – project
for the integration of innovative green power stations in communities)
This isnt Free energy as your making it sound, its green energy.
Source = "http://www.europeangreencities.com/pdf/activities/ConfApr2004/7.pdf"
I agree with you in that I think free energy is possible - but I do think you should change your wording else people will pick your site to bits matey. |
|
|
|
9 Stuart Barham
sbarham103@yahoo.com
http://www.stuartsvista.co.uk
Location: MK - UK
IP: 217.154.182.162
|
| Tuesday 13-Jan-09 15:07:41 GMT |
|
|
|
|
The comment;
"Austria-Hungary and other small communities that live off of the technology"
But we dont go as far as giving the products name? - Do we know it (I do hope the answer isnt "home made") |
|
|
|
8 Robby Daniel
godzoneone23@hotmail.com
http://supanova-survivor.spaces.live.com/
Location: Melbourne
IP: 58.175.17.130
|
| Monday 06-Oct-08 11:52:48 GMT |
|
|
|
|
Any way you look at it putting two magnets in a vertical tube with the same polarity facing & the instant interaction of the ever present constant potential energy over-riding the force of gravity is going to immediately 'PROVE' the free energy concept is there before you blink... For those who are seeking to actually build a working example of a free energy engine just look to simply rotating the stator magnets to reverse the polarity of the stator magnets using gears to actuate a the rotation as each magnet is precisely opposite the other but facing the each way... Rotating the stator magnets in line with the intended direction of thrust while both north & south cancel each other out by their proximity means your intended rotation will not have to push against ANY of the projected force of either magnet... Theoretically rotating them while they're next to each other in perfect opposite phase will completely CANCEL OUT ALMOST ANY OF THE MAGNETIC DRAG that is so often seen in machines built by those who seem to want to seek inertia to help them deal with a sloppy or inefficient design…
resistance to that rotation of the stator magnets would mean extra force would need to be applied to turn them & thus mass & complication would need to be factored in & built-in to accomplish the desired efficient interaction of the opposing forces so they can be harvested initially mechanically…Any resistance to that rotation that did come into play by not being able to rotate the magnet quick enough before they ceased to be immediately inverted next to each other & moved out of phase (Effectively cancelling out any of the force of each) which might otherwise mean the rotation would be pushing against the magnetic push & pull would mostly be negated by the effect of the 'FULCRUM PRINCIPLE' between the incredible amount of push-pull force these rare earth magnets possess & that we’d need to avoid creating which should then be-able to finish the rotation of the stator magnets in time with the rotation of the spindle magnets as each passes each other & begins to be PUSHED AWAY from the previous stator magnet readily taking full advantage of the pushing effect as it starts PULLING TOWARD the next...
A continuous well-timed stop-start rotation of the one set of stator magnets only within their own radius will allow you to take full advantage of both push-pull cycles to such a degree that initially being out of sync to a small degree may actually be good because otherwise this has the potential to be so readily efficient & with so little drag apart from spindle bearings & rotating the small stator magnets it might very quickly accelerate to such a degree as to totally wreck itself if enough potential drag wasn't built into the device as a safety...
Whatever you do don't try to move each magnet nearer or further away from each but merely rotate each around the centre of their own axis to reverse the polarity & try to complete that rotation in time... Thinking of some way to quickly spin these reasonably light magnets upon their own “CENTRE OF GRAVITY &\OR AXIS" while they're in phase (Sitting immediately next to each other & effectively completely cancelling each other out) & making allowances for them to quickly stop as they in the correct position for most effective push or pulling effect is really only a simple job for a mildly competent fitter & turner... Anyone who's seen the speed with which some of the industrial manufacture or food packaging machines these simple genius’s often sometimes build from scratch (Or Scotch if it’s late) (Ha-Ha) will know how easily it could can & will be done... Again I-don't claim any great scientific or engineering expertise here but I-do possess simple lateral common sense & though I-may not have explained myself well I-have thought through every possible bugbear to this principle... If you're a "RETIRED FITTER & TURNER" looking to make some money & fame as-well as do the world an urgent favour then talk to me & let's build it together... I'm not at all non-materialistic... I-just don't wish to be greedy & make money out of this particular idea...
I-have some others much better suited to making a buck... Once again if you wish to picture what I'm talking of just rotate them on their axis mechanically in much the same way as the old electric motor uses a reverse flow of electricity to reverse magnetic polarity & where anything is out of phase take it for granted that the 'FULCRUM PRINCIPLE' will easily turn the greater potential power of the stator magnets no matter how great or not the potential interactive force between each is... Once again if you can't quite understand what I'm saying take the time to Email me & let's talk a little & I'll say it in different words... I-have no engineering degree but I-do have a PHD in simple common sense...
Robby Daniel… |
|
|
|
7 allen
IP: 24.23.92.88
|
| Thursday 02-Oct-08 00:58:24 GMT |
|
|
|
|
Wow,
Looks like you have gathered a lot of second hand information and have not been able to document a free energy machine operate first hand as I would suspect no one has. I am not a skeptic as I would very much like to have one myself. I am always interested in seeing one operate, but each time I try to see one, the demonstration is postponed. Dennis Lee and Joe Newman have been promising for 20 years, but still can't produce. Hey, when you document one first hand, post it. |
|
|
|
6 Shellman
13thSailor@mail.com
Location: Oklahoma
IP: 68.12.119.124
|
| Sunday 21-Sep-08 06:36:04 GMT |
|
|
|
|
| I stumbled across your website today - courtesy of a Google search for “Free Energy”. I can’t tell you how good it is to know that I’m not the only person searching for the truth! I can hardly wait to see the expression on my friends face when it finally hit’s the fan! Keep up the good work! |
|
|
|
5 Vilmos Bartók
stihl97@gmail.com
Location: Hungary
IP: 81.196.139.252
|
| Wednesday 27-Aug-08 11:38:04 GMT |
|
|
|
|
I would like to congartaulate for this site...
Bye, Vilmos
|
|
|
|
4 PM
IP: 194.19.226.250
|
| Wednesday 13-Aug-08 07:47:58 GMT |
|
|
|
|
| Pictures of realy working free energy machines: and what about description how they work? I don't think they work |
|
|
|
3 marius
mariusviliusis@hotmail.co.uk
Location: lithuania
IP: 78.59.3.24
|
| Saturday 12-Jul-08 05:33:18 GMT |
|
|
|
|
| changes will come |
|
|
|
2 travis norman
tmnorman@centripledyne.com
http://centripledyne.com
Location: texas
IP: 66.139.236.137
|
| Monday 16-Jun-08 17:25:46 GMT |
|
|
|
|
| will let you know if I come up with something |
|
|
|
1 Bob
IP: 158.123.200.2
|
| Friday 08-Feb-08 19:48:35 GMT |
|
|
|
|
| Nice site! Finally someone who is aware of advanced energy technology! |
|
|
|
Total Records:16
